VIDEO

Teradek BOLT Pro 3000 Transciever Set

Wireless Video TX / RX

Produktnr: TER-BOLT-995
138 197,-
-+
I butikk:
Bestillingsvare (10 dager)
BeskrivelseTeknisk infoLignende produkter
Beskrivelse

SDI | HDMI Wireless Video Tranceiver Set
Longer Range
Transmit visually lossless video up to 3000ft with no delay
20mhz Channels
Use more than twice as many Bolts in one location or avoid interference like never before
2 New DFS Channels
Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
More Robust Than Ever Before
Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range
Built-in HDMI To SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
Individual Identity
Easily identify which Bolt TX and RX work together with removable colored top plates
Support for Spectrum Analyzer
You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
Added Broadcast mode
allows for longer range when used with directional antennas
Added three 'Quality' options to balance operation between maximum range and maximum overall quality
Supports Wired Pairing
Metadata and timecode support
3D LUTs
Dual inputs/outputs
Multicast capable
Manual frequency selection
USB 3.0 GRAB Engine included

In the box

Bolt Pro 3000 3G-SDI | HDMI Video Transceiver Set
1 x Teradek Protective Case waterproof with custom foam (12in x 9in x 4.5in / 30.48cm x 22.86cm x 11.43cm)
5 x Wireless Antennas (2dBi 2.4/5.8GHz) - For RX
2 x Wireless Antennas (2dBi 2.4/5.8GHz) - For TX
1 x 2-pin Lemo to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
1 x Lightstand Adapter (1/4"-20 inch)
2 x SDI (BNC to BNC) Cable 10 inch
1 x HDMI 18in Cable (Type A to Type A)
1 x USB 3.0 Cable A to Micro B (3.ft Length)
1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
1 Year Warranty

Teknisk info

Produktinformasjon

Produsent Teradek


Lignende produkter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.